Report this forum post

Have you checked the resistance in the Can loop? With this many fault codes it is likely you have a comm problem. You should see 60 ohms across pin a and pin b in the diagnostic connector. make sure the battery is unplugged and the key switch off.
  • Posted 15 Sep 2016 01:07
  • By BREWSKI
  • joined 10 Jan'12 - 1,699 messages
  • Nebraska, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Movers & Shakers
Jim Tompkins Jim Tompkins
Chairman of the board, Tompkins Solutions
Director of government affairs, Associated Equipment Distributors
National dealer development manager, Castle Equipment Company
Sales operations, Heli
Airman ENCL045
Yokohama, Japan
Used - Sale
TCM FD80Z7
TCM FD80Z7 1990
Yokohama, Japan
Used - Sale
Global Industry News
edition #1252 - 16 October 2025
In this week’s Forkliftaction News , we report on the GEP Global Supply Chain Volatility Index which shows Asian supply chains are at their busiest since June 2022 while the US and Europe’s supply chains remain under-utilised. One of the report authors describes the situation as being “as stable as it’s going to get”... Continue reading
Fact of the week
Brussels Airport in Belgium, Europe is the world's largest sales point for chocolate, with over 800 tonnes of chocolate sold annually. This averages out to about 1.5 kilograms sold every minute.