since we're on the subject here... i started the CAT GP25K forklift and it started fine but with the RED exclamation poin light on the dash. it also was running high on RPM at idle ( 1200 or so ) then the RPM's went up to about 1500 for a few of seconds. all this time you have no throttle response. then the idle went down to about 850 rpms (all this on it's own) and the RED light came off and the throttle response worked. any ideas???
CAT GP25K AC17C serial with the Tier 1 LP gas system.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.