Crown SC 4000 9A112945
The original problem was steer motor smoking and brushes worn out, it was looking pretty tuff but had it rebuilt.
With in the first two hours it through out all the copper out of the armature and seized.
Ordered a new motor and installed , checked voltages, checked pump and after two hours motor is extremely hot.
This machine only has a two hour battery so at this point voltages were getting low but the other motors did not show any signs of overheat.
What might cause this problem ?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.