voltage drops to only 24.6 or so.testing done with tires off ground so system is not under heavy stress.
pulled the 2 top brushes on left motor and they still have 7.5mm before reaching wear mark so they are worn about 5mm from new.will jack up and try to get to the bottom ones as well and order new springs just in case they are weak.springs check out ok but??
good thing i like this lift cause it's driving me NUTS.
may try another commutation capacitor if i can find something with similar specs.
[email address removed]
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.