Thanks a lot Addy. We in fact did this. The lines are connected like this. hyd tank to pump and pump to steer system and control box (one line divided to 02 via junction). What we did first was removed the delivery line from pump to steer system and control box right at the beginning from the pump out, which is one line at the beginning and connected a hose and let the hydraulic delivered back to tank without connecting to any other delivery lines. We ran the pump for about 15 minutes. Both the tank and hydraulic oil became excessively hot again. Have either the hyd pump or motor become faulty or have both become faulty ?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.