@ Rick C. I turned the lift truck on , the lbs at the 1/4 in hose went down to 5 1/2 and stayed there as the truck turned over/ran. I screwed the screw on the carb out, and played around with it and it still did nto effect it at all. I have not rebuit the carb as of yet. I will pull it off tomorrow and clean/rebuild it. As for the small plug at the top of the regulator, I am in the process of removing that and adjusting it, after a rebuild is it possible that that screw behind the plug could effect the idle and power when in forward or reverse?
Thanks everyone, I am no forklift mechanic by any means... I guess cause someone heard I build custom bikes for a living it was assumed by them I could do a forklift with my eyes closed...LOL