Yes, i have programmed with keypad, in fact, if you want to program operator codes the keypad is the only way to program. Its not the easiest to do, its difficult to see what your programming. Keypad 0-9 with a 'set' and 'O' buttons. Becareful when you order, there are two different can bus systems out, keypads look the same but will not work. You have to enter a 4 digit maintenance code, then know all the parameter numbers to enter into keypad, its alot of button pushing to accomplish.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.