Report this forum post

We had this problem with the vortecs in the Toyotas and to fix the problem we had to take all of the ground wires on the chassis off and grind the factory paint off down to bare metal. We found that the paint was insulating and we were not getting proper grounds just from the bolt threads themselves. You have to find all of the smaller grounds and not just the main negative. Hope this helps.
  • Posted 30 Jun 2011 21:44
  • By BusBoy
  • joined 20 Oct'09 - 14 messages
  • Ontario, Canada

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Global Industry News
edition #1244 - 21 August 2025
In our feel good story for the week, we report on a donation from Wisconsin-headquartered Big Joe Forklifts to the University of Wisconsin-Madison’s College of Engineering, after discovering the institution was still using one of its 1960s walkie stackers... Continue reading
Global Industry News
edition #1244 - 21 August 2025
In our feel good story for the week, we report on a donation from Wisconsin-headquartered Big Joe Forklifts to the University of Wisconsin-Madison’s College of Engineering, after discovering the institution was still using one of its 1960s walkie stackers... Continue reading
Movers & Shakers
Jan Zuurbier Jan Zuurbier
Global CEO, Swisslog
Board member, UKMHA
Strategic advisor, Roboteon
CEO Americas, Hai Robotics