Well I am new here and I have a problem. I hope someone can help me out. EV100 ZM Card I have no dash diplay at all. I put the dash into another lift and it works.I checked my voltage and ground to dash 5 Volts. I installed hand set and it displays on hand set. I also have checked the wiring from card to the dash display. Found nothing there, Removed Y plug pulled all wires out 1 at a time and made sure all plug ends was making good connection.Also everything else works fine hydraulics,forward/reverse
Confused Any help would be great to point me in the right Direction
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.