Working on a 7BRU23, I changed the print board display but now I lost the reach/retract function. Configuration C8 is No Straddle, Tuning C5 is two speed, Both solenoids are OK, Voltage are ok 22v, but Lift Amplifier turns pump only between 9-12% RPM. All other aux hyd functions are OK turning pump at 30% RPM. Scanning pulses I can see the signal arriving ok to LPA. Does anybody some idea about this trouble? Thank you
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.