picasaweb.google.com/my05stang/Forklift?feat=directlink
Here is a link to my online photo album. I was able to loosen the packing nut but before i get to far along i want to get some advice on what i am about to do.
From the looks of thing i should be able to remove the bolt going into the top end of the cylinder. Then there are two bolts holding that bracket to the mast. If i remove those 2 bolts i should be able to pull the slack out of the chains and lift that off the top of the cylinder. I should be able to pull the packing up and over the ram and out.
Dose this sound correct?
Michael
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.