Hey Ken, Forklift action has been down and I could not post a reply a few days ago. Make sure you are testing at the primary test port. Its a 1/4" plug with a 7/16 hex. The line that goes to the carb is a vapor draw line. I think you are testing at the correct place but I just want to confirm. If you have line pressure into the convertor and nothing at the primary test port the convertor is bad. When all else fails I always ran a direct line from the tank to the convertor bypassing the lockoff just to be super sure.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.