Thanks it has 2.4 volts using pin C at A and B and also if I use battery ground, I switched relays but no change. Previously I did find the yellow and green wire loose in the ECU plug and repaired the connection still no change. I also checked the group of red wires joined together by engine plug for voltage my thought is it appears the ecu is not getting powered up by the VCM as. Traced them back to the fuss/relay box and see this group gets power from a relay that's why I switched the relays already. Now at a loss still but Guessing that's why the can buss error as there are off components, does this sound right?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.