Fault description:
Pressure in pressure accumulator is less than 25 bar
Conditions of occurrence:
Voltage at pressure sensor 3B3 less than 2.2 volts or voltage at pressure sensor 3B4 greater than 3.8 volts
Result:
Charging of pressure accumulator
Speed is reduced for all hydraulic functions
Driving speed is reduced to 7.2 km/h
Possible causes:
Cable connections between pressure sensors (3B3, 3B4) and controller (X13:13, X13:49, X13:44, X13:63) open, shorted or faulty
Pressure sensor defective
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.