One of my customers / Friends picked up a S155FT sn: F024V02272M
There telling me the ECM is not sending voltage to the injectors or whatever it is that shoots fuel to the cylinders. I looked at the ECM that has 2 connectors with 80 pins on each connector.
that's a lot of pins and wires that go to something else that could have a fault, or a broken wire causing the problem. I work on a lot of electric trucks most of the time it's not the controller it's something else.
they did not say if it had any codes.
I'm thinking it has a busted wire or bad relay.
The ECM is pricy. I haven't found anyone that can test this thing or anyone that sells reman?
Briggs gave me a price on new one.
Briggs got back and said the do test them need to call service dept. will start there.
any other tips would help
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.