Report this forum post

Hello. Need help.
Deawoo g30-p-3 serial go-00097. Will not start. Before I unplugged the vacuum switch located be the regulator. It started and ran. Now I got not even a kick. LPG switch is good. I can manually open the diaphragm by applying a vacuum to the low pressure hose. Diaphragm in mixer is moving up a and down
Has spark. I am unfamiliar with is emission system. Electronic throttle body and drive by wire.
Hopefully someone out there has access to a manual.

Thanks again
  • Posted 6 May 2022 01:42
  • By Barfly_olaf
  • joined 10 Oct'09 - 81 messages
  • Nova Scotia, Canada
SEMPER FIDELIS

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field

Showcased in the Virtual Expo

Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.

PREMIUM business

VETTER Forks, Inc.
The world's most comprehensive product range as well as the most intelligent sensor fork for more safety and efficiency.
Global Industry News
edition #1246 - 4 September 2025
Next Thursday is R U OK? Day in Australia , an important opportunity to bring conversations about mental health out into the open and a reminder to check in on those around us, including our colleagues... Continue reading
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.