I am not to familiar with this forklift but thought i would give it a shot and im going to go through a step by step of what happened. I had a customer that needed brakes. I took off the front drive wheel and inorder to take off the drum, you have to remove what seems to be part of the axle. You need to apply 2 bolts to pull the cover off but it seems to be filled with gear oil. Now i can replace the brakes with no problem after that, but how to i refill the axel with gear oil after i put the cover back, there doesnt seem to be a top off hole.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.