When the unit is turned on the drive motor will try to turn to the right and then shut down, PMT if you would the steering contactor. At which time it throws up the wrench light up on the dash display. The unit will only lift.
I found that if I raise the drive tire off the ground and turn the drive unit all the way to the right then key on the unit, it will start up and operate correctly.
I've checked for loose connections at the steer motor, steer module, steer contactor and the steering card.
Any assistance would be appreciated.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.