Report this forum post

The mixer is a CA100, the vaporizer I can't remember off the top of my head but it was the direct replacement. It does act like it runs out of fuel but if I hit the button on the vaporizer at any point before it dies it dies instantly. That leads me to believe that it's not a lack of fuel issue. I can't find any timing marks to use a timing light with. I have set the timing to the point of best results. As far as the compression it's between 116-125 across all cylinders. I've read several instances where the filter or the fuel lock out could be partially plugged or shutting down. I haven't found an external filter or inline for that matter. I am going to bypass the fuel lockout to make sure that's not an issue.
  • Posted 23 Dec 2019 06:18
  • By Bibaboda
  • joined 22 Dec'19 - 2 messages
  • North Carolina, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA
Terberg YT220
Balling, Denmark
Used - Sale
Terberg YT223
Balling, Denmark
New - Sale
Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA