This all started when i got a leak in the valve box above the drive axel(where the pedals link to control forward and reverse). I had to take out the shaft that controls the flow out to get to the seal, replaced the seal made sure i didn't loose any parts and put it all back together. Now when i start it up and push forward or reverse it will idle up but wont move!! I did get it to move once by over turning that shaft with a pipe wrench almost running myself over in the process because the forklift would idle up then i assume get oil flow and just start barreling in reverse. Obviously the shaft was not in the right position.

If anyone can help me it would be greatly appreciated i am new to forums and dont know how to upload pictures but can email them if needed

Model number: h30t-03
Serial number: h2x351k0030430