1. Home
  2. Forums
  3. Report post

Report this forum post

I have 17v on one, and the other one that is connected to the EV-100 SCR controller I have 0v. The rectangle thing I have 0v and those cables go out and down to the motors.

All fuses on machine are hot 36 or 18v
  • Posted 25 Jun 2019 00:28
  • By jackson_p
  • joined 18 Jun'19 - 66 messages
  • Tennessee, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.

Showcased in the Virtual Expo

Movers & Shakers
Dominiek Valcke Dominiek Valcke
Dominiek Valcke
CEO, TVH
Chad Davis
Sales and operations director, Logitrans A/S
Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
Michelle Mitchell
General Manager, Forkpro Australia
Your Focus
Tom Ryder
Right-sizing your forklift fleet: the hidden opportunity for operational excellence
Tom Ryder
Read blog
Read more Your Focus blog articles
From the forum discussions …
"Toyota 42-5FG25 Wiring Question - Thanks to Tech Br455Brute: That "Thing" next to the distributor is actually a part of the distributor... I have two Toyota 42-5FG25 machines at my site too, and both of them have this spare wire that seemingly leads to nothing..."
Br455Brute, Canada
Read & Post in our Forums
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.