Hi,
I just wonder if there is any input out here.
I got a Truck in today with the issue that it would not raise higher than Stage 1 and showed Event Code 730 and evtl 817 for the FLS.
I went to A2.7.3 and when I raise the forks the counts only showed 1 and 0 as it went up. I opened Access 7 and checked the voltage between Pin7 and 12 and 7 and 13... the voltage moved as I raised and lowered the mast. I could not locate any damage on wires or harness going from ECR 5 to Access 7....any suggestions? According to T/S it leads to Access 7 is bad. Thank you !
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.