OK no field weakening contactor
Pot voltage is 5.79 at creep and drops to.2 at wide open tried 3 different pots. also tried a different card same outcome. What is drives me crazy is that it doesnt cut out at a certain voltage from the pot. Its almost like there is a RPM limiter in the scr once the motor reaches that rpm it cuts out but if you go into 1a it lets it accelerate past it. Talked to flight systems on this issue previously and they said i could pull the scr and send it in....
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.