I'm working on a toyota 7fgcu25 and don't have power to the solenoid that turns the LP on. Runs if I jump it to the battery. Need a wiring diagram
Showing items 1 - 2 of 2 results.
I had a similar issue not to long ago with the ground that powers the solenoid. I also put a ground from the battery to the solenoid harness and the forklift started. The problem was that the ground wire on the other side of the harness was broken. Follow the power wire through the harness and you may find a break through. Mine was by spark plugs 2&3. Good luck
Check fuel relay, dual fuel switch , fuel fuse. Fuses. All at or below fuse box. Solenoid activates from ignition circuit for distributor. If dual fuel, there's a switch by vaporizer. Make sure your 2 wires to distributor are good. Check grounds by 3 &4 cylinder on block.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.