Hello fellow techs, Working on this S40FT where I did an engine swap, Issue I have is I have no idea if it ran before it came to the shop, Issues I am currently dealing with is I am not getting any fuel (LPG) as the lockoff will not open, however it is getting 12V to the connector, and if you put 12V directly to it, it will open, but the second you plug it into the lockoff it looses the voltage. I have pinned the wires back to the ECM and they are good. With bypassing the lockoff by putting 12V to it, the fuel is stopping at the EPR. I am also getting a fault code of 2000-12 and I have no means to look it up as my company is not a Hyster dealer. Could any of you give some guidance on this? Much appreciated
Showing items 1 - 1 of 1 results.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.