Need help with error code E0 I have on Toyota electric lift 36 volts 5FBE15. The lift still drives but NO HOIST. What E0 means and what should I do to get the lift working again. Also I would like to have the explanation of all code in this lift for future need if possible. Your help is much appreciated and thank you.
Showing items 1 - 3 of 3 results.
HI, im having the same problem with my forklift. Did you find out what caused the problem on your lift related to E0 code? do you have a part number for the parts replaced?
Rodco
Can you point me to the most likely cause that makes the lift hoist not working after checking the fuse? My email is alextare33 at yahoo.com. Thanks
ERROR CODE EO: MAIN MATERIAL HANDLING CIRCUIT ABNORMALITY
1 Pump fuse (F2) blown
2 TMP defect
3 Main material handling circuit connection defect
4 Open circuit, connector disconnection or defective contact in RAP wiring
5 Disconnection or defective contact of wiring between TMP and DCISDD
6 Disconnection of wiring between CPU and DCISDD
7 Defective contact of each connector
8 Material handling DCISDD board defect
9 CPU board defect
Might help to post an email in your profile for future refrence in case anyone had info to send you..
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.