dear all,
we have a problem with the RPM, we press the accelerator but the RPM does not increase and the speed of the moving is very slow and the hydraulic also very slow, i hope that you can advise us to solve this problem
Showing items 1 - 7 of 7 results.
DEAR SIR,
THE PROBLEM IS SOLVED BY DUTZZ GYU SOFTWARE, T5HANKS FOR YOUR GUIDES.
Yes , truck in safety mode now. Overload you can reset after a force regeneration with software. Without this truck never operate normally.
dear sir,
we have a light alarm for overload on, is their relationship in this problem, but there is no error code.
try call Local Deutz company ,or a special Linde service guy. But Deutz better
many thanks for your feedback, unfortunately, we don,t have this software and we don,t have the suitable plug type for the cable.
anyway, we will look for this solution.
thanks again
Hello , Deutz engine in safety loop now. Possible sootfilter ash load full in software. Need Deutz engine software for read diagnostic and set ash load to zero after test burning off SCR system. Then truck oke.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.