Just thought would post some info on the Code E-27 for the Nissan K21/25 Engines.....had a truck Yesterday with this code and thought I would post my experience with it. Truck has almost 10,000 Hrs on the original spark plugs and has had an intermittent E-27 for some time now...I DID originally change out the Cam and crank sensors a while back and it cleared it up for a while but then it kept coming back.....I pulled and replaced the spark plugs yesterday....the plugs had no electrode left and had a gap of.080+
And yes I used Nissan original spark plugs part # 22401-FU42A for anyone interested....I ALSO found one coil pack that was dead again part # 22448-AR215....these engines will run and perform decent with 3 cylinders AND worn out plugs so a E-27 DOSENT always mean that the crank sensor is bad....first thing is look at the plugs AND coils......the way I check the coils is I start the truck and then unplug one coil at a time and look for a NOTICABLE RPM drop if no drop in rpm the that coil gets replaced......you WILL get a code E-34 doing this but I just clear all my codes after my repair is made....hope this helps anyone searching here in the forum at a later time on Nissans code E-27......
Showing items 1 - 1 of 1 results.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.