Motor Control Left Side - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Motor Control Left Side

Komatsu FB18M-3

Hello everyone,

we have a Kalmar AC ET30AMX (se) 24051A in the shop, problem is the left drive motor is spinning up but only at 1/8 or less throttle. steer pot appears to be working correctly as the motor reverses as it is suppose to when turned but never hits full power no matter where the tires are. the controller was persumed to be faulty and was sent out for repairs, installed when it got back and the same problem is there. no codes logged that we can see through the controller light solid green. we are banging our heads here if anyone has an idea we will gladly try it..
Patrick

Posted 10 Sep 2016 04:18
By pat_r
joined 3 Jul'13 - 25 messages
British Columbia, Canada

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Hello. Did the encoder fix this issue?

Posted 26 Apr 2022 03:28
By Greg_Roelofsen
joined 30 Oct'20 - 4 messages
Ontario, Canada

Post a Reply Report this post

Sorry, but never seen a Komatsu FB18M-3 with a AC controller.
Do you some more info about this controller?
Regards
Marcb

Posted 22 Oct 2016 00:53
By marcb
joined 10 Jun'14 - 222 messages
ANTWERP, Belgium

Post a Reply Report this post

I would replace the encoder bearing on the left motor. The encoder is responsible for communicating the motor speed to the controller.

Posted 20 Oct 2016 01:49
By Jeff
joined 8 Feb'07 - 61 messages
Georgia, United States

There is nothing worse than a sharp image of a fuzzy concept.
-Ansel Adams

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.