Hello everyone.
I have a problem with Linde H20D 391 series.
The speed limit is 9 km/h. Pathfinder isn't able to rise it.
There is no LFM or other safety devices.
ECU: 390 360 19 61.
Any advice?
Best regards.
Showing items 1 - 9 of 9 results.
Sounds like it could be a upa controller
Set to 9 ks and unable to change
Everything there is also OK, set to 20 and the option is turned off
Go to the switch controlled speed tab and check what it is set to there
It is not possible to change anything if the speed is 9 km/h.
Less - ok I change
More - no change
That's why only 9 ks
Change pump to 100 and Tom to max
You can set the rpm and pump angle but the sumaric is not allowed to exceed 9 km/h
1510 rpm and 40% pump angle as I remember.
Copying traction files from other ECU's doesn't help.
What is the max engine rpm set too and the pump angle?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.