1. Home
2. Forums
3. Technical Troubleshooting
4. Linde (& Baker)
5. T20

Linde (& Baker) T20:
linde pallet truck model T 20 AP Traction error 208

I have a linde electric pallet truck do not move , it plays hydraulic and steer but when you try to move forward or reverse it shows a traction error code 208.
can you help me solve this problem ?
thanks in advance.

• Posted 18 Dec 2019 07:59
• Modified 18 Dec 2019 08:02 by poster
• Discussion started by abdo_Embaby
• Egypt

Post a ReplyReport this post

Tiller assy

• Posted 5 Oct 2020 21:29
• Reply by Jt_Ng
• Victoria, Australia

Post a Reply Report this post

Hi, if it is Linde 131 series, you should check speed sensor.
Discrepancy between channel A (1X1:9) and channel B (1X1:10) detected in speed sensor

Possible causes
Short-circuit between a phase U, V or W and the truck frame. The AC voltage on the frame must exceed 14V
Connection 1X2 is defective
Speed sensor is defective
Malfunction of the speed sensor is caused by a mechanical failure in the drive motor

BR,
Cleve

• Posted 28 Dec 2019 13:30
• Reply by cleve_ivy
• Serbia, Serbia

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.