Mitsubishi FCG 25K:
LIGHTS

Yep that trucks that were for the US had control levers and a ECU which replaced the MAP sensor.

• Posted 29 Dec 2016 23:02
• Reply by Partsguy5
• California, United States

Post a Reply Report this post

It is lever control

• Posted 29 Dec 2016 22:46
• Reply by robin_j
• Florida, United States

Post a Reply Report this post

well if it's levers I've never not in the UK anyway seen a 4g63 with a ecu

• Posted 29 Dec 2016 17:57
• Reply by alanmitsi
• essex, United Kingdom

Post a Reply Report this post

Her truck should have the levers

• Posted 29 Dec 2016 09:29
• Reply by Partsguy5
• California, United States

Post a Reply Report this post

Is it fingertip control. where is controller fitted. Did you set the dill switch you will have a led by switch this will give you a flash code

• Posted 29 Dec 2016 08:32
• Modified 29 Dec 2016 08:53 by poster
• Reply by alanmitsi
• essex, United Kingdom

Post a Reply Report this post

This one does have an ecu P/n 9116515800 , lights that stay on are battery ,red triangle,oil press ,water temp , we checked everything is good , truck starts runs good , just the lights... thks

• Posted 29 Dec 2016 08:09
• Reply by robin_j
• Florida, United States

Post a Reply Report this post

A 25k will not have a ecu.Has a 4g63. is it fc or levers only light that would be on is the red triangle and no hydraulics if it is fc other than that it would be dash symbols

• Posted 29 Dec 2016 05:37
• Modified 29 Dec 2016 07:46 by poster
• Reply by alanmitsi
• essex, United Kingdom

Post a Reply Report this post

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.