instrument dash not working properly - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
instrument dash not working properly

I have this lift serial sq50nsybq and the lift wouldn't move but hydraulics would. Local shop supposedly fixed. When it came back it would move but dash would show red light on battery level (even though it was full charge) and no lights on fast/slow button area and hour meter always stays on(even when you turn off switch). They say it's a bad battery. Switched out battery, same issue. Replaced card from junk yard as they don't make original card anymore. Same issue with instrument dash. Any help would be great

Posted 25 May 2023 00:26
By loral_kinney
joined 25 May'23 - 1 message
South Carolina, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Loyal,

Serial number is not correct. Should read as letter, 3 numbers then another letter followed by 5 numbers and last one is a letter. I would suspect the controller may not be programmed correctly or wire connected to the wrong terminal. Good Luck

Posted 31 May 2023 04:29
By garland_m
joined 16 Oct'09 - 205 messages
Virginia, United States

Work Hard and Fish Long

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.