1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Erratic drive on turning

Discussion:
Erratic drive on turning

I have an Linde e30 336 with erratic drive when turning, I have replaced drive contacts which were burnt and sticking, this improved the problem the Acc pot wasn't reading all across range so have replaced this, but customer still complains of ticking noise on certain lock(full) and no drive just sits there rocking, have carried out full battery test and doesn't drop under load any guidance would be helpfull
  • Posted 12 Apr 2022 23:36
  • By Simon_Gregory
  • joined 24 Oct'19 - 5 messages
  • Bristol, United Kingdom
Simon
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
Or failing that
Jack up the machine and check that both drive motors are working
Could be only driving in one and when U turn one slows down and the other speeds up
  • Posted 28 Apr 2022 19:17
  • By Lindetechnz
  • joined 28 Apr'21 - 58 messages
  • New Zealand
Lindetechnz
Post a ReplyReport this post
I would say you have a steer potentiometer problem
Check pot and calibrate
Or replace pot and calibrate
  • Posted 28 Apr 2022 19:14
  • By Lindetechnz
  • joined 28 Apr'21 - 58 messages
  • New Zealand
Lindetechnz
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
The two internal cavities in our nose called nostrils function as separate organs. Each nostril has its own set of turbinates and olfactory receptors. The two independent organs work together through a mechanism called the nasal cycle, where one nostril is dominant for air intake while the other rests and is better at detecting scents.