Jungheinrich EKX515:
Controller

I have EKX515 Controller for fixing.
First time, it has no 24V at all on a one channel. I fixed it (Driver IC UCC27424D).
Now, when Jung moves the fork, power goes down (showed on LEDs), and E0645, E2703, E2304 are present.
Help!
Does anyone have the errors list?
  • Posted 1 Feb 2014 17:03
  • Discussion started by alexander_b
  • Moscow, Russia
Showing items 1 - 2 of 2 results.
We had an issue with the pick lights draining the main controller of 24v and showed bad. Try disconnecting the pick lights and see what happens.
  • Posted 4 Oct 2016 05:02
  • Reply by tyler_d
  • California, United States
Hello Alex, i hope that you are fine, now i have a similar problem that you, the machine is dead, and the 24v are not available. I appreciate if you can explain me more detail what component you changed. Thanks
  • Posted 5 Apr 2016 00:39
  • Reply by Yangomez
  • Bogota, Colombia

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Movers & Shakers
Jospeh E Creed Jospeh E Creed
CEO, Caterpillar Inc
Secretary general, European Rental Association
Chairman of the Board of Directors, UgoWork
vice president, Investor Relations, Konecranes
Fact of the week
A 1904 lecture by scientist Elie Metchnikoff extolled the benefits of consuming yoghurt for halting the "intestinal putrefaction" which he believed causes aging. The press reported yoghurt as a cure for aging and the ensuing popularity is still with us today.