News service and business centre for materials handlingHOME
18568,18565 3519
Risk Management

Thursday, 7 Sep 2006 ( #276 ) - HINSDALE, IL, United States
Your Focus
Terry Troutman has been in the forklift industry for 30 years. He is currently marketing director of Speedshield-USA, a division of Automotion Controls Systems, of Melbourne, Australia. He previously spent 12 years marketing Hoist Liftrucks worldwide through dealers and major accounts.

Contribute to Your Focus

In 2005, the US Occupational Safety & Health Administration (OSHA) found powered industrial trucks were the sixth biggest workplace hazard.

Violations of OSHA standards involving forklifts moved up two spots from 2004’s number eight ranking.

Employers must ensure only trained operators drive forklifts and that operators receive on-going training. Otherwise employers face liability when a workplace incident occurs. In most cases, courts and juries award large judgements against businesses for non-compliance with OSHA regulations.

According to the US Bureau of Labour Statistics, about 100 workers die and 20,000 are injured due to forklift incidents each year. Reported causes for fatalities were tip-overs (22 per cent), pedestrians struck by forklifts (20 per cent), drivers or employees crushed by forklifts (16 per cent) and drivers falling from forklifts (nine per cent).

The following tips can help employers avoid workplace incidents and huge pay-outs.

1. Only allow trained drivers to drive forklifts
Untrained forklift drivers must not be allowed access to forklifts. Forklifts should be equipped with magnetic ID card readers requiring a specific individual’s ID be used. Keys must not be left in key switches of forklifts and pass codes (when used) must not be shared among employees.

2. Train operators properly
Operators should be trained to use the right forklifts to lift loads. Sometimes they pick up a larger load than a forklift was designed to safely handle. Overloading is a major contributor to damage to forklifts and loads and increases the potential for tip-overs.

3. Remember the basics
It is important to set the parking brake before leaving the seat. An audible warning activated by a seat switch could notify an operator to activate the brake. Automatic shut-down after an operator leaves the seat, even for a few seconds, can prevent incidents and improve fuel economy. Some forklift manufacturers offer these features but, because they are not mandatory, they are not available on all models.

4. Check your checklist
A daily check sheet that details safety and maintenance inspections to be performed before a forklift is used is a good idea. Most companies have them. Accidents or forklift repair problems happen when procedures are not completed. Before each shift or operator change, check your checklist has been completed.

5. Make it pedestrian safe
In heavy pedestrian traffic areas, speed restrictions must be set. Plant visitors may be unfamiliar with forklift traffic. Forklift speed reductions can greatly promote workplace safety. Speed should be restricted near open loading areas or blind intersections.

6. Tip-overs and collisions
If all forklifts were forced to slow down at busy intersections, collisions could be averted. When making sharp turns or carrying an elevated forklift, slowing down would help prevent tip-overs and product damage.

7. Don’t overlook small incidents
When forklifts hit stationary objects, injury or damage follows. Most times, such incidents go unreported because the injury or damage is "small". However, it is difficult to determine who is responsible, and hence prevent repeated carelessness, without knowing when an incident occurred and who was driving at the time.

Safety is everyone’s responsibility, but risk management is necessary before incidents occur. Good safety precautions reduce employers’ risk, reduce damage and loss, and can increase net profits.
Discuss News stories in the Discussion Forums!
separate border
Global News

Global News

UNITED KINGDOM Bobcat has extended its range with the addition of the ... [more]
GERMANY Manitou has unveiled several new products at the Agritechnica trade ... [more]
AUSTRALIA Fork Force Australia has officially opened its new headquarters in ... [more]

JCB helps engineer WW1 tank centenary tribute - Rocester, United Kingdom
KION supports relief efforts - Summerville, SC, United States
Yale MX series honoured - Greenville, NC, United States
JLT adds Nordic dealer - Växjö, Sweden [more]
SINGAPORE MacGregor has held a ribbon-cutting ceremony to celebrate the opening ... [more]
JLG partners with Continental - McConnellsburg, PA, United States
TVH introduces dual-colour strobes - Olathe, KS, United States [more]
UNITED STATES Kalmar has signed a contract with a major North American ... [more]
TURKEY DP World, the global trade enabler, is upgrading two of ... [more]
GERMANY Wittenförden-based crane service provider Urban has taken delivery of a ... [more]
UNITED KINGDOM Narrow Aisle Ltd, manufacturer of the Flexi range of articulated ... [more]
  • 6485 Kalmar DRF450-65C5X, YEAR 2006, 45T Laden Reach Stacker, 5-High. View more
  • 6375 Terex CS45KM, YEAR 2011, 45T Laden Reach Stacker 5-High. View more
  • 6356 SMV 4542 TBX5, YEAR 2007, 45T Laden Reach Stacker 5-High. View more
  • 6573 SMV SL28 1200A, 28T Counter Balance Forklift, 3.5 m Lifting height. View more
  • 5910 Terex FDC25K7 ... [more]
Your Focus

Your Focus(Blog)

With surging automation and robotics technology advancing at a staggering ... [more]

Announcements (Ads)

PMH launches MaxTruck 2T USA campaign, and is looking for ... [more]
Load Lifter Mfg. recently hosted all of its Canadian Dealers ... [more]
RICO’s next generation of Explosion Proof lift trucks, AC-60 Phoenix ... [more]
IPO Lifts is a leading Bulgarian manufacturer of BIG heavy ... [more]
The Warehousing Education and Research Council (WERC) is the only ... [more]
Next year’s feature dates and topics are now confirmed! Although the topics may be refined further we are excited to reveal that the following areas will be covered: 22nd February: Power Solutions - an update 31st May: Fleet and Stock Management 27th September: Forklift Manufacturing in Europe ... [more]

Subscribe to the weekly e-newsletter.
©2013 - All rights reserved
Forkliftaction Media Pty Ltd
PO Box 1439
Milton QLD 4064
About Forkliftaction
The Forkliftaction Team
Privacy Policy
Site Map
Business Directory
Discussion Forums
Industry News
Events Calendar
Jobs & Resumes
Photo Galleries
Blog articles
Our Bloggers

Industry Brands
Company Index
Regions & Countries

Advertise on Forkliftaction
Editorial Features / Calendar
Featured Businesses
Past News Editions
Industry Associations
Storing your login information automatically.

When you select the 'Remember me' option, your login information will be stored on your computer in the form of a cookie. When you visit again, the stored login information will be retrieved automatically and you will not have to submit your login parameters (email address and password) each time you want to visit our members-only pages.

A cookie is a small piece of data that is sent to your browser from a web server and stored on your computer's hard drive. A cookie can't read data off your hard disk or read cookie files created by other sites. Cookies do not damage your system.

 Back to Top