Californian industry airs concerns over emission proposal

News Story
- 8 Sep 2005 ( #225 ) - SACRAMENTO, CA, United States
1 min read
by US correspondent Roger Renstrom
Following forklift industry heat, the California Air Resources Board (CARB) has postponed consideration of an emission standards proposal from September 15-16 to October 20-21.

CARB wants to lower emissions for off-road large spark ignition (LSI) engines (Forkliftaction.com News #215).

At an August meeting, California state assembly members criticised CARB for ineffectively dealing with the forklift industry during development of the emission proposal. CARB has withheld raw data forming the basis for its proposal and not allowed outsiders to review and critique the information, legislators said.

In 2001-2004, CARB introduced LSI engine standards for new forklifts and is now addressing emissions from older forklifts.

Industry members say the expense of converting engines in old forklifts might make them virtually worthless and forcing operators and dealers to install retrofit kits could jeopardise smaller businesses.

Audie Burgan, JM Equipment Co Inc owner, said many people felt the problem would disappear over six years through a turnover of inventory. Modesto-based JM distributes new forklifts from Nissan, BT Prime-Mover and Landoll, and sells used materials handling machines and agricultural equipment from five California locations.

Joe Hensler, president of Clarklift-West Inc, which trades as Team Power Forklifts, said: "We own several hundred forklifts.Converting that inventory might cost USD1.5 million." The Sacramento-based firm distributes new forklifts from Clark, Mitsubishi, Daewoo and Linde, and sells used machines and agricultural tractors at five California and Nevada locations.

Burgan, Hensler and Jay Waugh, of Graylift Inc, Fresno, California, are strongly encouraging others among the 50 forklift dealers in California to join a trade association willing to press the industry's case.

"As a group, we can be heard," said Steven Kost, executive director of the Far West Equipment Dealers Association (FWEDA), of Dixon, California. FWEDA has retained Sacramento attorney George Soares to communicate industry concerns.
Patent awarded for ammonia engine
Patent awarded for ammonia engine 15 May 2025 - Devon, United Kingdom - 1 min read
US lawsuit filed against Toyota
US lawsuit filed against Toyota 26 Sep 2024 - San Franciso, CA, United States - 1 min read
California bans propane forklifts
California bans propane forklifts 4 Jul 2024 - Riverside, CA, United States - 1 min read
Previously about:
Challenge to zero-emission regulation News Story - 5 Sep 2024 - Sacramento, CA, United States - 3 min read
Nissan gains ARB nod for 2012 engines News Story - 29 Sep 2011 - Marengo, IL, United States - 1 min read
ARB relaxes requirements, retrofits unavailable News Story - 4 Aug 2011 - Sacramento, CA - 3 min read
California law now includes forklift industry News Story - 17 Nov 2005 - SACRAMENTO, CA, United States - 2 min read
California law now includes forklift industry News Story - 17 Nov 2005 - SACRAMENTO, CA, United States - 2 min read
Briefs News Story - 4 Aug 2005 - 1 min read
California law now includes forklift industry News Story - 17 Nov 2005 - SACRAMENTO, CA, United States - 2 min read
Do you have materials handling news? Submit your news here

Industrial processes in paper and waste processing involves strapped bale handling and de-wiring. Durwen provides the smart solution for the industry, with its fully Durwen designed and made de-wiring bale clamp. Expensive factory part equipment was needed yesterday - use the smart solution from Durwen in future!

Check out our new website and get in touch with us today! 

You might want to check out our service portal as well – it backs you up 24/7!

Words of support …

These releases in Forkliftaction are a nice experience for SNDC... We got seven inquiries coming from Canada, USA, Mexico, Israel and Australia (five from retailers, two from machines manufacturers) and we are still in contact with them. I can state that's a success story!

David Massat, Sales Director OEM and Export

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Industrial processes in paper and waste processing involves strapped bale handling and de-wiring. Durwen provides the smart solution for the industry, with its fully Durwen designed and made de-wiring bale clamp. Expensive factory part equipment was needed yesterday - use the smart solution from Durwen in future!

Check out our new website and get in touch with us today! 

You might want to check out our service portal as well – it backs you up 24/7!

Industrial processes in paper and waste processing involves strapped bale handling and de-wiring. Durwen provides the smart solution for the industry, with its fully Durwen designed and made de-wiring bale clamp. Expensive factory part equipment was needed yesterday - use the smart solution from Durwen in future!

Check out our new website and get in touch with us today! 

You might want to check out our service portal as well – it backs you up 24/7!

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET