How to create an explosion proof forklift

Advertisement
- 3 Mar 2016 ( #759 )
2 min read
Safety Company Pyroban has issued an infographic aimed at all forklift OEMs and dealers to simplify the mystery that surrounds explosion proof forklifts.

"From chemical factories to whisky distilleries, explosion proof forklifts keep drivers and plant operators safe when the trucks operate in potentially explosive atmospheres, and help to prevent major industrial accidents," explains Steve Noakes from Pyroban, a company that provides explosion proof forklift conversions.

The infographic shows the Pyroban conversion process which can take between four and 12 weeks, depending on the requirements.




Step 1: Pre-conversion Vehicle Inspection

The original vehicle is fully assessed and tested before conversion to identify potential ignition sources.

Step 2: Explosion Proof System Design

The explosion protection system is then designed according to the risk. Pyroban selects the most appropriate protection method for the component type and final zone requirement, whether Zone 1, 2, 21 or 22 hazardous areas.

Step 3: Explosion Proof Conversion:

Each component is addressed according to the pre conversion analysis.

Enclosures may be used to protect arcing and sparking components, tailored electrical interfaces protect the vehicle control systems, surface temperature limitation and monitoring ensures the motors, engine, brakes, electrics and other components remain below the auto-ignition temperatures (T class) of flammable materials.

In the case of diesel engines, the solutions include exhaust gas cooling, flame arrestors, air shut-off valves and spark arrestors with automatic engine shutdown in the event of overspeed or other abnormal conditions being detected.

For both electric and diesel powered trucks, Pyroban's dedicated gas detection system may be used for vehicles operating in Zone 2 areas.

Other non-electrical hazards are also addressed. For example, forks and load handling equipment are protected, typically being clad in stainless steel. Static spark risks are addressed with anti-static materials or coatings.

WATCH ANIMATION EXPLAINING THE RISKS AND THE CONVERSION PROCESS:
the dangers of forklft trucks and mobile equipment in explosive atmospheres


Step 4: Testing and Inspection
After final testing and inspection according to prescribed legal standards, certification is issued confirming the equipment is safe for use in hazardous areas.

"The current edition of ISO 3691-1:2011, transposed into European standards in 2012, clearly states that with regards to safety, unauthorised truck modification is not permitted and that no alterations should be made without the prior written approval of the original truck manufacturer. Our OEM contracts ensure both parties are involved in the explosion protection process," confirms Steve Noakes.

For more than four decades Pyroban has developed close links with all major forklift brands. It also has extensive links with certification authorities including SIRA, INTERTEK, ElectroSuisse, INERIS and TUV in Europe; FM, CSA, in America; and PCEC, CQST and NEPSI in China, which supports the conversion of almost every type of mobile equipment to ensure full compliance with relevant local safety regulations such as ATEX in Europe or GB19854-2005 in China.
Pyroban typically converts counterbalance forklifts, VNA, order pickers, reach trucks and other warehouse equipment, but access platforms, cranes, military and mining equipment are also becoming common.

For further information, visit www.pyroban.com or send an email.
Automation solutions applied to the material handling world are continuously evolving. The latest technology development in Bolzoni has been to design and manufacture fully electric driven attachments to fit Automated Guided Vehicles.
Packaging Innovations & Empack, Featuring Contract Pack & Fulfilment, will be held at the NEC Birmingham on 15 & 16 February, 2023, and is free for attendees.

In the Virtual Expo

NL Series 4.0T-mini 5.0TLi-ion Battery Forklift from UN Forklifts
UN Forklift's new 4.0T-mini 5.0TLi-ion Battery Forklift is part of their NL Series, using UN's internal combustion design with the tough chassis, frame, counterweight and mast.

Latest Jobs

Melbourne, Australia
Lincoln, NE, United States
Sioux Falls, SD, United States
Le Mars, IA, United States

Movers & Shakers

senior marketing manager
Tompkins Robotics, United States
chief digital officer
Wiferion, Germany
director of dealer development
Toyota Material Handling, United States
director of national accounts
Toyota Material Handling, United States

FOR SALE ON MACHINERY-ONQ

Enforcer FLBAXT25
Australia Victoria
Netherlands
Japan
Netherlands
Canada Ontario

FOR SALE ON MACHINERY-ONQ

Unicarriers FB35-8S
China
Japan
United States Pennsylvania

Upcoming Events

March 20-23, 2023 - Chicago, United States
May 18-20, 2023 - Guangzhou, China
June 28-29, 2023 - Frankfurt am Main, Germany

Movers & Shakers

senior marketing manager
Tompkins Robotics, United States
chief digital officer
Wiferion, Germany
director of dealer development
Toyota Material Handling, United States
director of national accounts
Toyota Material Handling, United States