Hi fellow forklift techs.
We had a VSM blow and smoke on the H2.5ft.
No signs of wiring damage, customer was changing out fuses before our engineer arrived and also suspect 24v was put through the battery.
Anyone know where i can have this tested / repaired?
We run a few of these machines and never any issues with the VSM.
Any advise appreciated.
Showing items 1 - 3 of 3 results.
They must have just started repairing g them then as they never used to, have they said if it needs programming when refitted or not?
Hi mrLifter, thanks for the reply.
I got a response from TVH repairs today and these units can be repaired.
Thanks
You cannot get them repaired as the PCB is in resin, only new available and they are now about £1400, they were only around £750 not so long ago.
You will also need Briggs out to programme it.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.