Hi
Truck won't put dash on, only battery meter
Only steering works
Plug computer in for Linde software but canbox doesn't get power from the truck
Please advise
Showing items 1 - 5 of 5 results.
Can I suggest something to try
This used to happen at the factory when we built these
Turn the ignition on
Pop the display out of the cover and unplug the display then reconnect it whilst the key is still in on position
Hi did u sort this problem
Out?
check the 24volt dc for controllers , voltage on can also check. battery meter are the battery voltage, so i think missing 24 volt circuit
IIRC the canbox feed is from the drive controller, that flat box with two large connectors. I'm afraid that needs to get replaced.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.