Throttle position sensor - Technical Troubleshooting discussion in Forkliftaction's forums

Unicarriers (& Nissan) MCPL02A25LV:
Throttle position sensor

Is there any way to adjust /set this without hooking up to the computer?

Thanks,

Posted 7 Aug 2012 22:20
Discussion started by ATK1
South Dakota, United States

allenk@ntlifts.com

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

key on for 5 secs, key off for 10 secs, key off usually runs self calibration but if code keeps comming up you most likely have a problem inside the throttle body with linkage, probably from contamination or dirt or maybe lack of lubrication. Since most TB's do not allow you to service them because they are sealed units your only recourse is to replace the TB assy unfortunatly.

Posted 23 Oct 2012 19:24
Reply by swoop223
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

there is no adj on the tps only on the accel sensor. the tps is built into the throttle housing and is none servicable.

Posted 23 Oct 2012 12:38
Reply by jeremy_e
North Carolina, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.