1. Home
2. Forums
3. Technical Troubleshooting
4. Raymond
5. 420-C35QM

Raymond 420-C35QM:
CODE T4

Hi, I need help I have intermittent problem with the code T4 and the lift stops working. 420-c35qm raymond model.

• Posted 11 Nov 2011 05:34
• Discussion started by tecforelec
• P.R., Puerto Rico

Post a ReplyReport this post

grego thank you very much for your help, I could solve the problem, replace the VM and delete the code t4. thanks

• Posted 16 Nov 2011 09:50
• Modified 16 Nov 2011 09:51 by poster
• Reply by tecforelec
• P.R., Puerto Rico

Post a Reply Report this post

T4 - priority bypass sol4 open cct

Run test a81

Should see, 0a at neutral, 1.15 at lift and lower for auxiliary.

Check coil and wiring, otherwise r/r vehicle manager

• Posted 15 Nov 2011 05:52
• Reply by grego
• Alberta, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.