1. Home
  2. Forums
  3. Technical Troubleshooting

Yale ERC060RG:
ERC060VG Over heating

ERC060VG Over heating: We have had the battery/Charger technicians out as well as the Forklift service provider working on these 7 week old lifts and batteries and they cant seem to pin point the root cause. Seeking input from the field, below is some specs on our lift
MODEL: ERC060VG-YALE 6000# BASE CAP
BATT COMPT: 33.3" (847MM) LENGTH
BATTERY REMOVAL: SIDE - WITH ROLLERS
VOLTAGE: 48V W/BLUE BATT 350 AMP CONN
PERFORMANCE: PREMIUM PERFORMANCE PACKAGE
BATT CHG SYS: TK ARRG FOR CONVENTIONAL
AP/ENVIR CONST: STANDARD 32 TO 120 F
CONSTRUCTION: UL TYPE "E"
MAST: 102-294"-76" free lift
  • Posted 1 Jul 2011 05:13
  • Discussion started by Medragr
  • Arizona, United States
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
have you resolved this issue?...the temp sensor for the motors are sealed inside the motors, install a 470 ohm res. and test run....i've replaced 2 motors for this reason
  • Posted 5 Aug 2012 01:58
  • Reply by raymondguy
  • Alberta, Canada
Post a Reply Report this post
Good Morning If the Dealer is looking at the overheating and put the problem in to contact management you should be getting support from NACCO Engineering. I would ask if the Cables have been looked at. We have have to up size our Main Cables from Batttery to the controller. You may want to ask the dealer. Good Luck
  • Posted 2 Aug 2012 23:41
  • Reply by Techhelp
  • Wisconsin, United States
Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

PREMIUM business

VETTER Industrie GmbH
The world's most comprehensive range of forks and the most intelligent sensor fork for more safety and efficiency.
VETTER Industrie GmbH
From the forum discussions …
"JLG 2630ES:...These lifts pots can be a hassle...if you replaced them..make sure you changed wiring..they come set normally open..."
Matthew_Reed, United States
Read & Post in our Forums
Movers & Shakers
Linda Häkkilä Linda Häkkilä
Linda Häkkilä
vice president, Investor Relations, Konecranes
Rhiannon Stone
vice president operations, Elokon Group
Bennit Schmieder
President, EP Equipment Europe
Mathias Höglund
Senior vice president human resources, Kalmar
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Upcoming industry events …
LOGMAT
May 09-11, 2025 - Bangalore, India
TOC Americas 2025
October 21-23, 2025 - Panama City, Panama
The Battery Show Asia
July 15-17, 2025 - Hong Kong, Hong Kong
More Events
Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Maersk opens French warehouse Hauts-de-France, France
Upcoming industry events …
LOGMAT
May 09-11, 2025 - Bangalore, India
TOC Americas 2025
October 21-23, 2025 - Panama City, Panama
The Battery Show Asia
July 15-17, 2025 - Hong Kong, Hong Kong
More Events
Latest job alerts …
Field Service Technician - Small Equipment
Louisville, KY, United States
Service Manager
Dubuque, IA, United States
Material Handling Equipment Rental Manager
Louisville, KY, United States
View more jobs alerts
Movers & Shakers
Linda Häkkilä Linda Häkkilä
Linda Häkkilä
vice president, Investor Relations, Konecranes
Rhiannon Stone
vice president operations, Elokon Group
Bennit Schmieder
President, EP Equipment Europe
Mathias Höglund
Senior vice president human resources, Kalmar