The problem Iam Haveing with the forklift wont idle I clean the carb still wont idle propley I adjusted the lean and rich still know different now one thing I have notice when you put your hand over the carb it idles when you move it cuts off is this a intake problem or need new carb now this forklift have a new cylinder head just been overhauled new dist cap rotor brush wires and spark plugs any sugestions on this problem I thank you in advance and look forward to your answer.
Showing items 1 - 6 of 6 results.
does the propane have to be off to engine if not in use does it ruin the regulator
should be a vacuum hose on top of reg facing engine. if its gone or broken the idle mixture is comprimised. just for the record.....you have tried to adjust the screw right? if not screw it out 1/2 turn at a time and try it
it runs better at high idle
does this truck have one or two electric solenoids on the regulator?
LP or Gasoline? have you checked the LP carburetor's diaphragm? does it run better at high RPM? does it run at high rpm at all?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.