Yale GLP030BNUA085:
MAZDA D5 MOTOR

Had motor rebuilt was getting water in the oil when they checked the motor found there where 2 plugs in the head it was coming from got it back now it is worse the it was before. WILL A F2 MOTOR FIT IN WHERE A D5 IS OR IS THERE A LOT OF DIFFERENCES LIKE EXHAUST, TRANSMISSION?
  • Posted 5 Jun 2024 20:25
  • Modified 24 Jun 2024 22:32 by poster
  • Discussion started by DAVID
  • New York, United States
DAVID PELTON
Showing items 1 - 5 of 5 results.
OK THANKS
  • Posted 11 Jun 2024 21:52
  • Reply by DAVID
  • New York, United States
DAVID PELTON
David,

The D5 and FE or2.0 are very similar. I believe they will swap though you may have a few issues with wiring. I will try and find additional information that may help. Thanks.
  • Posted 11 Jun 2024 21:34
  • Reply by Fishmech
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.
what size motor is the mazda D5 PROPANE like a 2.0 or a 2.2 ?
  • Posted 11 Jun 2024 08:39
  • Reply by DAVID
  • New York, United States
DAVID PELTON
OK WILL TELL THEM THANKS
  • Posted 11 Jun 2024 05:17
  • Reply by DAVID
  • New York, United States
DAVID PELTON
David,

They should have replaced all the plugs in the head, not just the ones that are leaking. They should have also quoted installing new valves and replacing the head gasket, timing chain and gears along with water pump. This is an old engine, but they hold up pretty good. The FE and F2 were better. Good Luck.
  • Posted 11 Jun 2024 04:46
  • Reply by Fishmech
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Movers & Shakers
Linda Häkkilä Linda Häkkilä
vice president, Investor Relations, Konecranes
vice president operations, Elokon Group
President, EP Equipment Europe
Senior vice president human resources, Kalmar
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Toyota 8FDU30
Flesherton, Ontario, Canada
Used - Sale
Terberg RT223-4X4
Balling, Denmark
Used - Sale
Upcoming in the editorial calendar
Crown WP302020
Braeside, Melbourne, Victoria, Australia
Hire
Taylor TX330S
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
USD159,500