No travel - Technical Troubleshooting discussion in Forkliftaction's forums

Crown WP2300 SERIES:
No travel

Have a wp2335 that has no travel. Hyd works normally and safety reverse works. Brakes release when thumb wheel is moved in any direction. No led light on controller. Battery voltage 24.5

Posted 3 Aug 2022 01:41
Discussion started by f_brun
Texas, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

24.5 at controller. Yes line contact pulls in.

Posted 3 Aug 2022 03:14
Reply by f_brun
Texas, United States

Post a Reply Report this post

Where are you reading the voltage? Also is your line contactor loading when you bring the tiller arm down and you press the throttle, you should hear a click noise just like the one heard for the pump contacter have youchecked your fuses.I've encountered although I am not an expert that sometimes you can read 24.5 volts at the battery but it may only read 23.3 volts at the ecu so it's not enough voltage to operate. the pallet jack

Posted 3 Aug 2022 02:51
Reply by PalletjacksRus
United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.