Only tilts forwards, no tilt back - Technical Troubleshooting discussion in Forkliftaction's forums

Toyota 8FBE20U:
Only tilts forwards, no tilt back

Hey hope everyone's doing good. We have a 8FBE20U with roughly 6000 hours on it and the unit will only tilt forwards. When the handle is pulled back the hydraulic pump does not turn on at all. when pushed forwards there is a sound of a microswitch but none when pulled back. If anyone knows where the switch for the tilt is located it would be appreciated. The other handles seems to have pots attached to the handle at the valve But the tilt is the only one without a pot. Any help is appreciated, cheers.

Posted 21 Apr 2022 23:43
Discussion started by lonnster
Ontario, Canada

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

turned out to be lower switch on the tilt thanks

Posted 20 May 2022 01:13
Reply by lonnster
Ontario, Canada

Post a Reply Report this post

Sounds like your top tilt switch isn't functioning. Should be able to test in analyzer menu. And very possible your tilt forward switch is stuck to the on position, causing issue to not tilt back. Should be a code for these that's displayed if not functional

Posted 19 May 2022 21:52
Reply by ron_k
North Dakota, United States

4kliftman

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.