Battery connection - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster W40Z:
Battery connection

I purchased a W40z B218 lift. No batteries and the owner gave me a diagram. Purchased 4 batteries that will work but when I check the voltage between batteries it shows 12 volts. It says it's a 24v lift. The batteries are equal to US Battery 1800xC2 6 volt. I saw the lift work but the seller wanted the batteries for another unit because they were new. The drawing looks like a combo of serial and parallel connections.
Thanks

Posted 19 Jan 2022 05:49
Discussion started by CharlieT
Massachusetts, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

I read your post l never seen this truck battery's hooked pallets and series the truck is wired 24 volts with 4 6volt deep cell battery's series to make 24 volts to the end of the run also make sure if has eternal battery charger that you hook it up or controller will not turn on hope this helps

Posted 21 Jan 2022 01:50
Reply by Scott_
Pennsylvania, United States

Scott

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.