Hello,
I have some troubles with the genie SX-150.
I've tried a lot bit it wont exist.
The machine is a genie sx-150
SN: SX15015H-147
Year : 2016
Software of the machine is:
Tcon : v1.10
Pcon : V2.11
Scon : V1.10

The problem is the machine gives some fault between : Tcon/Scon calibration inconsistent.
So the boom wont go up and don't want to extend ( also I won't drive ).
I did many times the calibration per manual instruction and it wont help.
Some times the fault leaves and after 2 hours I came back.
Ive I look at the parameters or run screen of the Tcon or Scon with Webgpi I don't see something strange.
Nothing strange with the angle sensors or length sensor.
any help?