Hyundai 25D-7E - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Hyundai 25D-7E

Hi hoping someone can help, I am working on a Hyundai 25D-7E
when you get off the seat with the engine running park brake on, the seat switch icon appears and cuts the drive, and when you return to the seat it wont reset.
If you recycle the ignition switch it resets ok.
Tried new opss unit, tested seat switch, park brake switch

Posted 30 Oct 2019 22:03
Discussion started by fatbob
staffs, United Kingdom

graham@hflifttrucks.co.uk

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Thanks will check those relays,
yes its just drive that we lose
Thanks again much appreciated.

Posted 31 Oct 2019 02:30
Reply by fatbob
staffs, United Kingdom

graham@hflifttrucks.co.uk

Post a Reply Report this post

check e-mail.

Posted 31 Oct 2019 02:12
Reply by Speedfreak
Niederlande, Netherlands

Post a Reply Report this post

Check "travel cut relay" marked with CN2

Also Relay CR5 is the neutral relay, check that one too.

When returning to seat, do yo uhave hydraulic functions? Is it only the drive that cuts off?
That should give you a direction in what to look for.

Posted 31 Oct 2019 02:10
Reply by Speedfreak
Niederlande, Netherlands

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.